A bar in the game room was always a must. As we began planning the bar, we wanted it to be unique, functional, and classy. Yes, this was a game room, but we still wanted it to feel cohesive with the style of the rest of our home.
I’ve always loved the look of hanging wine glasses (plus it would free up so much space in our cabinets), so we decided to tackle a hanging wine glass holder on our bottom shelf. If you don’t have option shelving, that’s okay! You can also attach these wine racks to the bottom of cabinets. It’s a simple and inexpensive DIY!
Alright, let’s start DIYing!
This post contains affiliate links for your convenience (which means if you make a purchase after clicking a link, I earn a small commission, but it won’t cost you a penny more)!
What You’ll Need
How to make a wine glass holder under cabinets
Step 1: Cut your wood
Cut your square dowels to 7.5″. We chose 7.5″ because our shelves are 9″ thick and two wine glasses were 6.5″. We wanted to give the wine glasses the extra 1″ so that we wouldn’t have to worry about placing them exactly on the rack every time.
Cut your 1.5″ poplar boards slightly longer than 7.5″.
First cut two pieces that are 1.25″ wide. Set one piece aside and cut the second piece to be a little shorter than 3.5″.
Step 2: glue
Glue your square dowels on top of the poplar boards. Center a square dowel on each board. Then clamp or place something heavy on the boards while the glue dries.
Step 3: paint or stain
Spray paint or stain your wine glass holders.
step 4: determine spacing
Cut a piece of cardboard or spare wood to 3.5″ to act as a spacing guide for your wine glass holders. Make sure to test the spacing for your wine glasses and adjust the spacing accordingly. Our wine glasses are pretty standard, but it’s always good to double-check!
Mock up the spacing for all of your holders to make sure they are centered on the shelf or cabinet as you wish.
Step 5: assemble
Nail in your first wine glass holder. We nailed in each piece 3 times. Be careful here. You need to make sure that you are nailing straight and through both the poplar board and the square dowel.
Place the cardboard spacer between the holder that you just nailed in and the next piece. Once everything is lined up, nail in your next piece. Repeat until all of your holders are up.
There you have it! Your DIY handing wine glass rack is complete! There’s something about hanging wine glasses that looks so fancy.
As always, we would LOVE to see your photos. Tag us or send us a picture of your new wine glass holder on Instagram and reach out with any questions!