Have you ever moved into a new space and realized that you didn’t have anything to put on your new walls? Or have you looked around your current space and wished for an inexpensive refresh?
You’re in the luck! These DIY wood squares are the perfect decor for any space. But beware: once you make one, you might fall in love and want to make some for every room in your house!
The ONLY tools you need to DIY
Want to build magazine-worthy furniture and decor? The Essential Tools Roadmap will show you what tools you actually need to complete 95% of DIY furniture and home improvement projects (it’s not as many as you think!).
Let’s start DIYing!
This post contains affiliate links for your convenience (which means if you make a purchase after clicking a link, I earn a small commission, but it won’t cost you a penny more)!
What You’ll Need
How to Make Simple Wood Wall Art
Wish you could build magazine-worthy furniture and decor without a workshop full of expensive tools? Get the Essential Tools Roadmap and find out which tools are essential to DIY and which 3 tools you should start with.
Step 1: Cut wood for the frame
First, cut the boards for the frame. We made our wood squares 12″ x 12″, so we cut two boards to 12″ and two boards to 10.75″.
If you would like the breakdown of our exact measurements for every piece (yay for not needing to do your own math!), you can download them at the bottom of this post.
Note: To ensure you cut the boards to the same length, stack them on top of one another and tape the edges. This way you can cut both at the same time. If you are wanting to make two (or three) wood squares, double (or triple) the amount of pieces we mention in this tutorial.
Step 2: Glue the frame
STEP 3: create the diamond
Position your miter saw or miter box to cut at 45-degrees.
Cut the four boards you will use to create your diamond. You can cut the first one and then use it as a template for the rest.
Glue and clamp your diamond in place.
Repeat to create the square in the middle of the wood art.
Step 4: make the corner pieces
The next pieces will likely be too small to cut with a miter saw, so you might need to break out the handsaw for the next step.
Mark the center of your board and place your saw in the 45-degree slot of your miter box. Line up your wood so that you cut to the center of the board.
For these pieces, one side will be an arrow and the other side will be a normal cut.
Measure 2x the length that you need the pieces to be + a little more to account for the saw blade. Cut both sides to be an arrow.
Note: If you don’t have a miter box, that’s okay! Just use a square ruler to mark your 45-degree angles and then cut along those lines.
Cut the board in half to create two equal pieces. Repeat steps 8 and 9 so that you have 4 equal pieces.
Glue the pieces into the corners of your wood art.
Note: if any of your pieces are snug, use a rubber mallet to position them into place.
step 5: add additional nails
Once all of the glue is dry, add two nails to the top and two to the bottom for extra support.
Step 6: sand and stain
Hand sand the wood square, paying special attention to any areas that might have gotten glue on them. We first went over with 120 grit and then finished with 220.
Stain your wood square. We used Minwax Special Walnut to achieve our look.
P.S. Wish you could stain like a pro? Check out our staining guide!
step 7: hang your wall art
Attach a picture frame hanger to the back to easily hang your wood square.
There you have it! DIY wood wall art that will look good in any room of the house.
These wood squares are especially great for any awkward spaces or walls that you might have. You can hang them as squares or as diamonds. They also work great as frames for small photos or artwork.